digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac6068c-mac6075c si licon bidirectional thyristors available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings rating symbol value unit peak repetitive off-state voltage (1) (t j = 110c) mac6068c MAC6069C mac6070c mac6071c mac6073c mac6074c mac6075c v drm 25 50 100 200 400 500 600 volts rms on-state current (t c = 85c) i t(rms) 4.0 amps peak non-repetitive surge current (1 cycle, 60 hz, t j = -40 to +110c) i tsm 30 amps circuit fusing considerations (t j = -40 to +110c, t = 1.0 to 8.3ms) i 2 t 3.6 a 2 s peak gate power p gm 10 watts average gate power p g(av) 0.5 watts operating junction temperature range t j -40 to +110 c storage temperature range t stg -40 to +150 c mounting torque (6-32 screw) (2) 8.0 in. lb. note 1: ratings apply for open gate conditions. thyristor device s shall not be tested with a co nstant current source for blocki ng capability such that the voltage applied exceeds the rated blocking voltage. note 2: torque rating applies with use of torque washer. mounting torque in excess of 6 in. lb. does not appreciably lower case to sink thermal resistance. main terminal 2 and heatsink contact pad are common. * soldering temperatures shall not exceed 200c for 10 seconds. thermal characteristics characteristic symbol maximum unit thermal resistance, junction to case r ? jc 3.5 c/w thermal resistance, junction to ambient r ? ja 60 c/w electrical characteristics (t c = 25c and either polarity of mt2 to mt1 voltage, unless otherwise noted) characteristic symbol min typ. max unit peak blocking current (either direction) (rated v drm @ t j = 125c, gate open) i drm - - 2.0 ma peak on-state voltage (either direction) (i tm = 6.0a peak) v tm - - 2.0 volts gate trigger voltage (v d = 12v, r l = 100 ? , t j = -40c) mt2(+),g(+); mt2(-),g(-), all types mt2(+),g(-); mt2(-),g(+), all types (v d = rated v drm , r l = 10k ? , t j = 110c) mt2(+),g(+); mt2(-),g(-), all types mt2(+),g(-); mt2(-),g(+), all types v gt - - 0.2 0.2 1.4 1.4 - - 2.5 2.5 - - volts holding current (either direction) (v d = 12v, gate open, t j = -40c, initiating current = 1a) mac6068c-mac6075c t j = 25c mac6068c-mac6075c i h - - - - 30 15 ma sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130213
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac6068c-mac6075c si licon bidirectional thyristors characteristic symbol min typ. max unit turn on time (either direction) (i tm = 14a peak, i gt = 100ma) t on - 1.5 - s blocking voltage applicatio n rate at commutation @ v drm (t j = 85c, gate open) dv/dt - 5.0 - v/s quadrant characteristic symbol i ma ii ma iii ma iv ma peak gate trigger current (main terminal voltage = 12v, r l = 100? , t j = 25c) (main terminal voltage = 12v, r l = 100? , t j = -40c) i gtm 10 20 10 20 10 20 20 40 mechanical characteristic case to-126 marking body painted, alpha-numeric pin out see below to-126 inches millimeters min max min max a 0.425 0.435 10.80 11.050 b 0.295 0.305 7.490 7.750 c 0.095 0.105 2.410 2.670 d 0.020 0.026 0.510 0.660 f 0.115 0.125 2.920 3.180 g 0.091 0.097 2.310 2.460 h 0.050 0.095 1.270 2.410 j 0.015 0.025 0.380 0.640 k 0.595 0.655 15.110 16.640 m 3 typ 3 typ q 0.148 0.158 3.760 4.010 r 0.045 0.055 1.140 1.400 s 0.025 0.035 0.640 0.890 u 0.145 0.155 3.680 3.940 v 0.040 - 1.020 - sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130213
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac6068c-mac6075c si licon bidirectional thyristors sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130213
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac6068c-mac6075c si licon bidirectional thyristors sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130213
|
